[New post] Soft Wax 2.0 Now Available (Broken Switch Edition)
Lost Art Press posted: " Don't worry Bean. The machine is now fixed! The lipstick making machine that Katherine uses to make Soft Wax 2.0 has been on the fritz. One of the toggle switches started to feel mushy-mushy. Then the heating element wouldn't turn on. When it comes" Lost Art Press
The lipstick making machine that Katherine uses to make Soft Wax 2.0 has been on the fritz. One of the toggle switches started to feel mushy-mushy. Then the heating element wouldn't turn on.
When it comes to machines and tools, I find that switches are the weakest link. So I took apart the machine's control panel and found that the toggle switch had melted from the inside.
I could replace the toggle, but I wanted someone else to examine the components to make sure they were sound. Enter Eric Applegate, a local man of many talents. One of the many things he does is build and rebuild machines. And he has a candle-making business.
So he and his daughter stopped by to evaluate our machine. It's all good news. The components are good. The manufacturer simply used the cheapest switch available. So now Katherine is back in business. She just made up a batch of Soft Wax 2.0 and posted it in her etsy store.
Notes on the finish: This is the finish I use on my chairs. I adore it. Katherine cooks it up here in the machine room using a waterless process. She then packages it in a tough glass jar with a metal screw-top lid. She applies her hand-designed label to each lid, boxes up the jars and ships them in a durable cardboard mailer. The money she makes from wax helps her make ends meet at college. Instructions for the wax are below.
Instructions for Soft Wax 2.0 Soft Wax 2.0 is a safe finish for bare wood that is incredibly easy to apply and imparts a beautiful low luster to the wood.
The finish is made by cooking raw, organic linseed oil (from the flax plant) and combining it with cosmetics-grade beeswax and a small amount of a citrus-based solvent. The result is that this finish can be applied without special safety equipment, such as a respirator. The only safety caution is to dry the rags out flat you used to apply before throwing them away. (All linseed oil generates heat as it cures, and there is a small but real chance of the rags catching fire if they are bunched up while wet.)
Soft Wax 2.0 is an ideal finish for pieces that will be touched a lot, such as chairs, turned objects and spoons. The finish does not build a film, so the wood feels like wood – not plastic. Because of this, the wax does not provide a strong barrier against water or alcohol. If you use it on countertops or a kitchen table, you will need to touch it up every once in a while. Simply add a little more Soft Wax to a deteriorated finish and the repair is done – no stripping or additional chemicals needed.
Soft Wax 2.0 is not intended to be used over a film finish (such as lacquer, shellac or varnish). It is best used on bare wood. However, you can apply it over a porous finish, such as milk paint.
APPLICATION INSTRUCTIONS (VERY IMPORTANT): Applying Soft Wax 2.0 is so easy if you follow the simple instructions. On bare wood, apply a thin coat of soft wax using a rag, applicator pad, 3M gray pad or steel wool. Allow the finish to soak in about 15 minutes. Then, with a clean rag or towel, wipe the entire surface until it feels dry. Do not leave any excess finish on the surface. If you do leave some behind, the wood will get gummy and sticky.
The finish will be dry enough to use in a couple hours. After a couple weeks, the oil will be fully cured. After that, you can add a second coat (or not). A second coat will add more sheen and a little more protection to the wood.
Soft Wax 2.0 is made in small batches in Kentucky. Each glass jar contains 8 oz. of soft wax, enough for about five chairs.
No comments:
Post a Comment