fitz posted: " I don't spray finishes enough to feel confident doing it – that is especially true for "complicated" work such as stick chairs (not so complicated to make, but sort of complicated to paint, because there are many surfaces to be coated). I'll bet I'm " Lost Art Press
I don't spray finishes enough to feel confident doing it – that is especially true for "complicated" work such as stick chairs (not so complicated to make, but sort of complicated to paint, because there are many surfaces to be coated). I'll bet I'm not the only one. So, I grabbed my camera as Christopher Schwarz got ready to spray the final coat on his most recent chair and shot the video below. It's a bit of a dance, moving fluidly around the project… so apologies for the brief moments of Chris' backside blocking the view.
The legs got good coverage on the first two coats (one coat with the chair flipped upside down, the next with it right-side up), which is why they're skipped on this go-round. But the general order of operations is to spray all vertical surfaces (legs and sticks) with the fan pattern horizontal, then the horizontal surfaces with the spray pattern vertical.
A few additional notes:
• The paint is Tuscan Red General Finishes Milk Paint (which is actually an acrylic), thinned about 10 percent with water.
• The spray setup is the Apollo Sprayers HVLP ECO-5 5-Stage Turbine system.
• The picture above is the chair shown in the video, but with the addition of a coat of buffed Liberon Black Bison Wax in the color Dark Oak.
• Our spray booth is also the back patio/bier garden/barbecue area/catio. So, we don't spray when it's really humid, too hot, too cold, or raining/snowing. And we almost always bring the work inside immediately after spraying, so that it can dry in a controlled environment.
No comments:
Post a Comment